Email: chap2@chap2.comCall Us Today: (920)648-8125
 

Wet Spray Paint Application for Store Signs & Displays

(click on thumbnail to enlarge)

Wet Spray Paint Application for Store Signs & Displays
Wet Spray Paint Application for Store Signs & Displays

This international franchise approached us with a specific task in mind. They had a series of canopies and arches used on the façade of their restaurant that needed painting.

The 7'x 9' fiberglass canopy weighed nearly 500 lbs and the series of arches ranged from 10 to 25 ft long, and weighed between 50 and 200 lbs. We created custom racking and handling apparatuses for product staging and transported the arches to our Global Finishing Solutions dust collection booth, where we scuffed, sanded and then cleansed and wiped down each arch to prevent contamination.

We mixed and catalysed the paint using Graco ProMix 2KE paint mixer in our specially designed paint mixing room and prepared the cross draft spray booths. The panels were then primed to customer specs and painted to spec and mil thicknesses. The arches were then dried in our temperature controlled facilities. Serial stickers were applied and lighting covers were assembled.

After inspection of paint application, adhesion and gloss finish, any necessary touch-ups were applied. The products were loaded onto pallets and custom designed racking systems, and packed with foam to prevent any transport related damage.

Request for Quote

Project Highlights for Wet Spray Paint Application on Store Signs & Displays

Product Description These canopies and arches are used on the façade of a fast food restaurant
Capabilities Applied/Processes Primary
Preparation
  • Sand and/or Scuff Product to be Painted
  • Clean and Wipe Products to Prevent Contamination
  • Mix and catalyze paint
  • Paint Booth Preparation
  • Product Staging in Booth (Custom Racking and Material Handling)
Wet Painting
  • Prime Panels to Spec
  • Paint Topcoat to Spec and Mil Thickness
Curing
  • Set Paint Booth to Proper Temperature and Allow for Proper Baking Time
Assembly
  • Assemble Light Cover to Canopies
  • Apply Serial Sticker
Secondary
Inspection
Packaging
  • Load product onto Pallets and Custom Racking
  • Place Foam Between Packaging Bands & Components
Equipment Used to Manufacture Part Global Finishing Solutions Dust Collection Booth , Cross Draft Spray Booth, and Paint Mixing Room
Graco ProMix 2KE Paint Mixer
Overall Part Dimensions 7' x 9' Drive Through Canopies
10' to 25' Arches
Material of Components Fiberglass
Material Finish Yellow Coating
In process testing/inspection performed Inspection
  • Inspect for any cracks, Pin Holes and/or Marks, fish eyes, dry spray, debris, runs
  • Inspect Paint Adhesion
  • Inspect Gloss Finish
  • Touch Up as Needed
Estimated Part Weight Canopies - 500 lbs
Arches - 50-200 lbs
Industry for Use Fast Food Restaurant
Delivery Location National
Standards Met Customer supplied print, 2D CAD Drawing
Product Name Canopies & Arches

View Other Portfolio

Back to top